FOR SALE
[ listing updated on 2005/03/08 ]

CHEVROLET LS1 PARTS 406 CI SMALL BLOCK

I have chevrolet parts for sale (still a few ones left). Please note that all parts are new and were never used. I've imported myself all the parts from the USA. All parts were cleared through the customs (no more custom fees to pay, heavy shipping cost, etc...). No waiting time either. No lost parts ... (we can meet before you pay and take the parts if you want).




           {~~~~}{~~~~} if you're interested in buying these parts, write me. {~~~~}{~~~~}
to prevent spam, I have written 2x [removespam] in my email address. You must remove it to write me to the correct e-mail address.


1) 450 HP Lingenfelter LS1 engine kit.
Power produced: 450 hp at the minimum (these are real numbers because only quality parts were chosen).
It is a full kit engeneered by Lingenfelter with a mild camshaft. no emission trouble, idle etc...
note: you will need to have your computer programmed when installing the engine kit.

- [NEW] CNC ported LS1 Lingenfelter heads
US price: 1599.95 us$
+ 600.00 us$ (if no exchange of core price)

And you must add also:
- shipping (both ways if you want to send your heads and save the 600.00 us$)
- VAT
- custom fees (10% in European union)
- all tax fees are calculated on (shipping+parts) cost
- [NEW] Valve springs CompCams #26918
(already installed inside the heads. See photos please)
US price: 179.95 us$ + VAT + custom fees + shipping
- lift : .600
- 1.055 / 1.290 Single Beehive Ovate
- I.D. .660/.885
- Seat load 130@1.800
- Open load 318@1.200
- Coil bind 1.085
- Rate 313
- [NEW] Hydraulic Roller Camshaft (GT2-3 camshaft)
207°/220° 0.573"/0.580" w 1.7 rocker 117.5°
US price: 429.95 us$ + VAT + custom fees + shipping
** Price is 2290,00 Euros **  
This kit can be installed on any LS1 engine. With good intake and exhaust system, you will get to 450 hp (more if you remove cats).
If you make a quick calculation, you'll see that this kit cost about 2200 + 180 + 430 = 2810 us$.
Now, if you add shipping and other costs, the total cost goes to 3200 - 3400 Euros.

I sell this kit for 2290 Euros ! Nothing more. It is a brand new kit from Lingenfelter.
Very famous and reputable company who makes fabulous engines. You can have it in 2 days if you're from a European country.

I sell these parts in one unique kit at a huge discount. (depending on the VAT rate in your european country)
=> 2290,00 Euros and nothing more (very little shipping, no customs hassle, etc.).


           {~~~~}{~~~~} if you're interested in buying these parts, write me. {~~~~}{~~~~}
to prevent spam, I have written 2x [removespam] in my email address. You must remove it to write me to the correct e-mail address.




2) computer + k&n air filter
- [NEW] ECM (Electronic Control Module).
us price: 458.00 usd + VAT + custom fees + shipping
- [NEW] k&n air filter
us price: 46.95 usd + VAT + custom fees + shipping
** Price is 320,00 Euros **  


           {~~~~}{~~~~} if you're interested in buying these parts, write me. {~~~~}{~~~~}
to prevent spam, I have written 2x [removespam] in my email address. You must remove it to write me to the correct e-mail address.





3) 406 ci SMALL BLOCK
chevrolet (v8 6,7 liter)

This engine is NEW: all parts come from PAW after the block had been completely overhauled (like new).
This block is a 2 bolt which is the best one to have for a 400. This engine has never run. It's on a wooden crate.


CRANKSHAFT:
***********
- - 400ci SB crankshaft 0.010"
- - balance and pin fit (by PAW)
- - M77 main bearing set 0.010"
- - Double Roller Timing Chain Set
- - 8" damper 400 Small Block Chevy. If you plan on installing it on a Corvette C4 it's possible. You'll have to put a special 6.75" damper (externaly balanced engine). You can get one easily. Just contact me if you need one (cost is about 100 Euros at your door).

RODS:
******
- - M77 connecting rod bearings
- - 400 SB chevy rods

PISTONS:
*********
- - TRP forged pistons 0.030"
- - SEA moly rings
- - compression ratio: 9.3/1 compatible low quality gas and mild turbo charged applications.

CAMSHAFT:
*********
Warning: this is a roller camshaft: this is the best technology to have on a small block.
- - cam lock plate
- - cam button spacer
- - MILODON reinforced timing chain cover
- - CROWER hydraulic roller camshaft #00403
  duration duration @ .050" lift lift with 1.5/1 rockers lift with 1.6/1 rockers
INTAKE 286° 226° @ .050" .519" .552"
EXHAUST 294° 236° @ .050" .540" .576"
- - CROWER hydraulic roller lifters 66310
- - CROWER pushrods 70303
- - Chevy High Volume Oil Pump


HEADS:
******

- - EDELBROCK Performer 6071-9 Aluminum Cylinder Heads
70cc combustion chamber - 166 cc intake port. The best flow rates of 170cc aluminum heads on the market >> Big Power from 1000 to 5500 rpm.

- - EDELBROCK Head Bolt Kit
- - MANLEY guide plates 42150

BLOCK:
*******
- block newly overhauled, cleaned, painted, ... and bored (by PAW) to 0.030" >> displacement is 406ci, that is 6667 cm3.
- it is a 2 bolt block, casting number 509, the most appreciated 400ci Chevy Small Block.


 

     

    

On a well tuned engine with the right intake manifold, exhaust headers, etc...
power figures will be the following: +500 hp and +500 ft.lbs (about 700 N.m)


Prices:
- 400SM 2 Bolts !!! short block with forged pistons:       1490.00 Euros
- Crower !!! hydraulic roller lifters + camshaft:                 390.00 Euros
- Edelbrock !!! Aluminum Performer heads:         
                890.00 Euros
- Roller Rockers:                                                                   180.00 Euros

TOTAL 500 hp capability 406 ci engine:                           2950.00 Euros






4) headers
- stainless-steal long tube headers

  SOLD  
(Germany)





5) chassis
- hotchkis anti-swaybars kit (2234).

  SOLD  
(Sweeden)
 

 



(this last one is a manufacturer picture)


6) miscelaneous
- chevrolet workshop manual.

  SOLD  
(France)
   

the driver manuel (silver book) is only on the picture
as a comparison. this one is not for sale.


Some of the parts have already been sold... and the cats are not for sale :-)))))